Extreme Networks Summit WM Series Dokumentacja Pobierz pdf (Strona 29)

HWC_GSG_Chapter 1_Overview.fm

Summit WM-Series WLAN Switch Software Solution

Collecting information for installation

120385-00 Rev 01, March 2007

Summit WM, Getting Started Guide 29

Data Ports

information

• IP address – IP address of the physical ethernet port.

• Subnet mask – Subnet mask for the IP address, which separates

the network portion from the host portion of the address (typically

255.255.255.0).

•MTU – The maximum transmission unit or maximum packet size

for this port. The default setting is 1500. If you change this setting,

and are using OSPF, you must make sure that the MTU of each

port in the OSPF link matches.

• Function – The port’s function.

•Host Port – A port for connecting Altitude APs with no

dynamic routing.

• Third-party AP Port – A port to which the third-party AP is

connected.

• Router Port – A port that connects to an upstream, next-hop

router in the network.

•VLAN ID – The ID of the VLAN to which the AP is connected.

Static Routing Static IP address – The static IP address that is assigned to the

Summit WM Switch when it is configured for static routing.

OSPF Routing •Router ID – The router ID is its own IP address. You must record

the Summit WM Switch’s IP address here.

• Area ID of OSPF – Id of OSPF’s area. 0.0.0.0. is the main area in

OSPF.

• OSPF Authentication Password – If you select Authentication

type as Password, then you will need a password.

DHCP Service • IP address range – This is the range from which the IP address

will be distributed across the network.

• Start IP address – This is the start IP address of the range.

• End IP address – This is the end IP address of the range.

• Lease duration – The DHCP server assigns a client an IP address for a

given amount of time. The amount of time for which the IP address can

be given is called lease duration.

•Days – The number of days for which the lease can be given.

•Hours – The number of hours for which the lease can be

given.

• Minutes – The number of minutes for which the lease can be

given.

IP Address for

installing DHCP

service

IP Address – If you are using WM-AD, you will need the WM-AD’s

IP address.

If you are not using WM-AD, you will need the Summit WM Switch IP

address.

Configuration data Description Your entry

Table 4 Information gathering table

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 139 140

Komentarze do niniejszej Instrukcji

Brak uwag

Extreme Networks Summit WM Series Dokumentacja Strona 29

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Extreme Networks Summit WM Series