Extreme Networks Altitude 4600 Series Przewodnik Instalacji Pobierz pdf (Strona 20)

Hardware Installation

Altitude 4600 Series Access Point Installation Guide

This placement requires installation of the provided light pipe for viewing the status

lights of the unit.

Suspended Ceiling Mount Hardware

● Light pipe

● Badge for light pipe

● Safety wire (recommended) and security cable (optional)

Ceiling Mount Procedure

To mount the Altitude 4600 Series Access Point on a ceiling:

1 If possible, remove the ceiling tile from its frame and place it, finished side down, on

a work surface.

2 If required, install a safety wire, between 1.5mm (.06in.) and 2.5mm (.10in.) in

diameter, in the ceiling space.

3 If required, install and attach a security cable to the unit’s lock port.

4 Mark a point on the upper or unfinished side of the tile.

5 Push the light pipe through the tile at the mark and remove the light pipe. If

necessary, use a drill to make a hole in the tile.

6 Attach appropriate antennas to the connectors.

Badge

Ceiling Tile

Light Pipe

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

Brak uwag

Extreme Networks Altitude 4600 Series Przewodnik Instalacji Strona 20