Extreme Networks Altitude 4700 Series Dokumentacja Pobierz pdf (Strona 54)

100

101

Hardware Installation

Altitude 4700 Series Access Point Product Reference Guide

3 Attach the radio antennas to their correct connectors.

For more information on available antennas, see “Antenna Options” on page 47.

4 Cable the Access Point using the approved power supply.

CAUTION

Do not supply power to the Access Point until the cabling of the unit is complete.

a Connect an RJ-45 CAT5e (or CAT6) Ethernet cable between the network data supply (host) and

the Access Point’s GE1/POE port.

b Verify the power adapter is correctly rated according the country of operation.

c Ensure the cable length from the Ethernet source to the Power Injector and access point does not

exceed 100 meters (333 ft). The Power Injector has no On/Off power switch. The Power Injector

receives power as soon as AC power is applied. For more information on using the Power

Injector, see “Power Injector System” on page 48.

5 Verify the behavior of the LEDs. For more information, see “LED Indicators” on page 57.

6 Align the bottom of the ceiling T-bar with the back of the Access Point.

7 Orient the Access Point’s chassis by its length and the length of the ceiling T-bar.

8 Rotate the Access Point chassis 45 degrees clockwise.

9 Push the back of the Access Point chassis on to the bottom of the ceiling T-bar.

CAUTION

Ensure the safety wire and cabling used in the T-Bar installation is securely fastened to the building

structure in order to provide a safe operating environment.

10 Rotate the Access Point chassis 45 degrees counter-clockwise. The clips click as they fasten to the T-

bar.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 647 648

Komentarze do niniejszej Instrukcji

Brak uwag

Extreme Networks Altitude 4700 Series Dokumentacja Strona 54

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Punkty dostępu do sieci WLAN Extreme Networks Altitude 4700 Series